Total: 88,531.80฿ (รวม VAT)
-11,236.00฿
BS-0-J-5 Semi-universal dividing head with 3 jaw chuck 5″
• Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
• Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
• The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
• All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
• Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
• Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation
• Made in taiwan
ER Spring Collet Chuck With Taper Shank,NT30-50
* Made in Taiwan
* Price per product / 1 pcs
* Order specified: Model
-4,025.00฿
HV-6 Horizontal -Vertical Rotary Table 6″
• Worm is hardened and ground. The ratio is 90:1. The work table is graduateda full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible.
Live Lathe Center VLC Series
• Center shaft & main body are made of alloy steel under heating treatment to provide higher rigidity (HRC60° ± 2°) and satisfied wear-resistance.
-55,160.00฿
U2 Universal cutter grinder
• For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiused cutters or negative taper angle of cutters.
• The universal index head is provided at 24 positions so that any particular angel or shape can be obtained, free 3600 or 100 rotation is allowed for grinding End Mills.
• Twist Drill. Lathe Tools, only replace the attachment to the index head without any complex setup.
• Made in Taiwan
-4,780.00฿
VA-5 Angle fixed milling vise 5″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
-9,390.00฿
VA-6 Angle fixed milling vise 6″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
VERTEX VCF-500W Chamfering & Deburring Unit,Wheel-Type
• Simplified operation, suitable for unskilled personnel.
• Easily to be beveled for any length made of steel, cast iron, nonferrous metals, plastics, acrylic etc.
-12,740.00฿
VHO-6 Hydraulic Machine Vise,Power Build out type 6″
• Rigid material-vise body of ductile iron FCD 60JIS(equal to GGG60) with 60kgs/m㎡ or 80,000 psi tensile strength.
• Vise bed flame hardened to HRC 45 and up, takes up wear and maintain accuracy for long.
• For multiple use plural vises are available on tolerance of 0.01mm in the height of vise bed and in alignment of the clamping surface of the vise jaw at extra cost.
• Mechanicl/hydraulic spindle without original clutch mechanism.
• Sown thrust “Semi-sphere Segment” mechanism-eliminates jaw lifting and work flitting.
• All surface ground.
-49,385.00฿
VU_Universal Tilting Rotary Table 300 mm
• Tiliting range 0-90 degrees from horizontal to vertical position, 1 rotation of handle equals 3 degrees, 5 minutes tilting reading.
Showing all 10 results