BS-0-J-5 Semi-universal dividing head with 3 jaw chuck 5″
• Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
• Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
• The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
• All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
• Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
• Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation
• Made in taiwan
BS-2A-J6 Universal Dividing Head With 3 Jaw Chuck 6″
• Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
• Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
• The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
• All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
• Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
• Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation
• Made in taiwan
CS-6 Super indexing spacer with 3 jaw chuck 6″
• This product combines the advantages of the Super Index with those of a worm-geared index.
• When mounted on a milling, boring or other machine tool it can carry out single-purpose indexing and indirect indexing using the worm-drive mechanism.
• Disengaging the worm drive the 24-notch master plate permits 2, 3, 4, 6, 8, 12 and 24 dividing in the same manner as the
• Simple Index. When the chuck is removed, the unit can be used as a horizontal and vertical type rotary table.
• The operating handle to rotary table worm gear reduction ration is 1:90. The operating handle collar is graduated in one minute, and readings down to ten seconds can be set on the vernier.
• Super spacer index include 3 jaw chuck, 10”/250mm face plate, masking plates 2, 3, 4, 6, 8, 12
Drill Grinder,EDG Series,Capacity Ø12mm-Ø 26mm
• Can make special drill with this machine.
• High efficiency.
• Long life.
Drill Grinder,EDG Series,Capacity Ø2.5mm-Ø 13mm
• Can make special drill with this machine.
• High efficiency.
• Long life
ELM-1000 Permenet Magnetic Lifting Capacity 1,000 kg
• Made by “Rare Earth” magnet with technology of improvement.
ER Spring Collet Chuck With Taper Shank,NT30-50
* Made in Taiwan
* Price per product / 1 pcs
* Order specified: Model
HV-6 Horizontal -Vertical Rotary Table 6″
• Worm is hardened and ground. The ratio is 90:1. The work table is graduateda full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible.
Live Lathe Center VLC Series
• Center shaft & main body are made of alloy steel under heating treatment to provide higher rigidity (HRC60° ± 2°) and satisfied wear-resistance.
Permenet Magnetic Lifting ELM series,Capacity 2,000 kg
• Made by “Rare Earth” magnet with technology of improvement.
• All new models with “light weight” “less dimens
Permenet Magnetic Lifting ELM series,Capacity 3,000 kg
• Made by “Rare Earth” magnet with technology of improvement.
ROHM Drill chucks with key taper mount size 1/2″-J-6
• Made in Germany
• Price per product / 1 pcs