* Low cost, high practicality. It can be used in diverse machinery.
* Easy to be operated by pushing the handle down for oil feeding.
* Small discharge volume and easy to install.
• KSB type has a timer, which controls the operation and interval time.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
• It has a pressure gauge where an operator can check the pressure easily.
• Recommend working with CV type progressive feeders that can easily control the volume of lubricant.
• Made in taiwan
• KSB has a timer that controls its operation and interval time.
• KSB has a pressure gauge that enables the user to check the operating pressure easily.
• A magnetic level switch can be added to KSB on request to detect the grease level automatically.
• Please refill grease from the grease inlet of KSB to prevent air and impurities from entering the grease tank.
• Integrated Motor with Oil Pump only rotates either clockwise or anti-clockwise and the specification is only available for 1/4 HP Horizontal Motor.
• The shafts of motor and pump rotor are integrated so that it can prevent the two shafts from chafing against each other and prolong the life time of it.
• There are CYP-12A and CYP-13A available for different flow rates.
• It can be added an adjustable pressure valve as optional. The range of pressure adjustment is 2~5 kgf/cm².
• It can be applied widely for lubricating or cooling in various machines, such as CNC
machines, knitting machines and planning machines.
• Suitable oil viscosity range is 32~68cSt@40 ℃
• The suitable operation temperature range is 0℃ ~ 90℃.
• Made in taiwan
* Low cost, high practicality. It can be used in diverse machinery.
* Easy to be operated by pushing the handle down for oil feeding.
* Small discharge volume and easy to install.
• CLHA type has an air tight pushing lump, which can press grease out smoothly.
• Low cost and high practicality. It can be applied to various types of machines.
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
• CLHA type is suitable for Grease NLGI 000~0
• Recommend using a grease gun for filling with lubricant from the grease inlet. It can avoid air or impurities dropping into the reservoir.
• Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
• CLHA type has an air tight pushing lump, which can press grease out smoothly.
• Low cost and high practicality. It can be applied to various types of machines.
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
• CLHA type is suitable for Grease NLGI 000~0
• Recommend using a grease gun for filling with lubricant from the grease inlet. It can avoid air or impurities dropping into the reservoir.
• Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
• Manual grease type lubricator is small and easy for installation.
• The standard grease tube thread of CLHA-25 is M15 x P2.5 with reservoir cover and thread M15 x P2.0 is also availableon request.
• CLHP-40 and CLHP-50 have a hard spring inside that is suitable for NLGI grades 000 to 2.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
• Rotary oil pump is also called triangular pump or oil circulation pump.
• Recommend to assemble with 1/4 HP Horizontal Motor.
• The flow rate of CYP-10A ~ 13A are all different, and the standard model is clockwise. Please remark on order while request anti-clockwise one.
• It can be added an adjustable pressure valve CYP-AV as optional. The range of pressure adjustment is 0~5 kg/cm².
• Special request on assembling with reservoir or cyclic inlet or motor with fan, etc. are available. Refer to Chen Ying Circulating Electric Lubricator series products.
• The standard revolution is 1420~1720 rpm. Low rpm 450~1200 rpm is only available for CYP-12L type.
• It can be applied widely for lubricating or cooling in various machines.
• The suitable oil viscosity is R32~68cSt @ 40 ℃ and suitable operating temperature is 0℃ ~ 90℃.
• Made in taiwan
• The pressure and discharge volume is bigger than the rotary oil pump. It’s easy to operate and install.
• Use clean oil to avoid the block or damage the pump.
• Standdard fixed-hole direction is \. If the fixed-hole direction is /, please mark ※ T on order code.
• The standard fixed hole is 125x100mm for 1/2HP motor assembled with heavy oil pump. If the fixed hole needs to be 112x90mm, please mark ※K while ordering.
• The connector can help to reduce the noise while the motor is operating. It also can make the shaft much more durable. With a dust-shelter for the safety concern.
• 1/2HP and 1HP TECO motor are available on request. Please mark ※ M while ordering.
• The proper oil viscosity is 32~220cSt@40℃9.
• Recommend to install an Oil Auto Cleaner or a Line Filter to prevent any impurities from clogging or causing damage to the heavy oil pump in order to prolong the life cycle of heavy oil pump.