KCMM-2A ปั้มจ่ายน้ำมันอัตโนมัติ พร้อมระบบตั้งเวลา 2 ลิตร
• มีระบบเตือนภัย
• ใช้น้ำมันที่แนะนำเท่านั้น (# M32 หรือ # 68)
• หมุนมอเตอร์ตามทิศทางที่ระบุเท่านั้น (ควรหมุนมอเตอร์ตามเข็มนาฬิกาเมื่อมองผ่านช่องเปิดด้านบนในกรณีของรุ่น KCMM-2 ไม่จำเป็นต้องยืนยันทิศทางการเลี้ยวเนื่องจากจะหมุนเพียงทางเดียว)
• อย่าล็อคสกรูแน่นหนาที่ด้านบนของปุ่มฟีดโดยทันทีหลังจากทำการปรับตามปริมาณการเปลี่ยนถ่ายน้ำมันเครื่อง
• ดึงที่จับ 4 ถึง 5 ครั้งก่อนสตาร์ทมอเตอร์หรือหลังจากมอเตอร์ไม่ได้ใช้งานเป็นเวลานาน หลังจากดึงที่จับแบบมือแล้วอย่าพยายามดันกลับเพราะก้านจับจะกลับคืนสู่ตำแหน่งเดิมโดยสปริง
•ทำความสะอาดตัวกรองหรือแทนที่ด้วยตัวกรองใหม่ปีละครั้งหรือบ่อยกว่านั้น
• สินค้าคุณภาพจากใต้หวัน
Product Description
KING-CHU Automatic intermittent Lubricator / ปั้มจ่ายน้ำมันอัตโนมัติ รุ่น KCMM,พร้อมระบบตั้งเวลาทำงาน
• KCMM SERIES
Code : KCMM-2A
Specification รายละเอียด
* Tank วัสดุถัง : Resin
* With Alarm system
* Interval Time (min) : 5,10,15,30
* Discharge Pressure (kg/cm2) : 2.5~3.0
* Discharge rate cc/shot : 2.5~5.5
* Outlet Dia : 4Ø or 6Ø
* Tank Vol(cc) : 2,000
* Effective Vol (cc) : 1,800
* Voltage : 220V.
* Weight น้ำหนัก (kg.) : 2.5
Note : Order No สั่งซื้อโปรดระบุ : / Interval Time (min) : 5,10,15,30
► Use the recommended oil only. (#M32 or #68) |
► Turn the motor only in the direction indicated. (The motor should be turned clockwise when looking down through the upper opening.In the case of Model KCMM-2, it is not necessary to confirm the turning direction, because it turns only one way.) |
► Do not fail to fasten firmly the locknut located at the upper side of the instant feed button after making adjustment to the dischange amount of oil. |
► Pull the manual handle for 4 to 5 times before starting the motor or after the motor has not been used for prolonged time. |
After pulling the manual handle, do not try to push back as the hurdle returns to its original position by spring action. |
► Clean the filter or replace it with a new one once a year or more often. |
How to adjust discharge oil amount of automatic intermittent lubricating pump.
* Fix the tip of piston rod (*) by ㊀ screwdriver, and loosen locknut Ⓘ counter lockwise. |
* Turn the connecting rod ② to set it at the standard positon after loosening the locknut Ⓘ and fix it firmly in that position. |
* The graduation and discharge amount are shown in the diagram on the right. |
น้ำหนัก | 2.5 kg |
---|
There are no reviews yet.