Currently Empty: 0.00฿
-11,236.00฿
BS-0-J-5 Semi-universal dividing head with 3 jaw chuck 5″
• Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
• Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
• The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
• All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
• Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
• Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation
• Made in taiwan
-22,365.00฿
BS-2A-J6 Universal Dividing Head With 3 Jaw Chuck 6″
• Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
• Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
• The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
• All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
• Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
• Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation
• Made in taiwan
-13,880.00฿
CS-6 Super indexing spacer with 3 jaw chuck 6″
• This product combines the advantages of the Super Index with those of a worm-geared index.
• When mounted on a milling, boring or other machine tool it can carry out single-purpose indexing and indirect indexing using the worm-drive mechanism.
• Disengaging the worm drive the 24-notch master plate permits 2, 3, 4, 6, 8, 12 and 24 dividing in the same manner as the
• Simple Index. When the chuck is removed, the unit can be used as a horizontal and vertical type rotary table.
• The operating handle to rotary table worm gear reduction ration is 1:90. The operating handle collar is graduated in one minute, and readings down to ten seconds can be set on the vernier.
• Super spacer index include 3 jaw chuck, 10”/250mm face plate, masking plates 2, 3, 4, 6, 8, 12
-4,025.00฿
HV-6 Horizontal -Vertical Rotary Table 6″
• Worm is hardened and ground. The ratio is 90:1. The work table is graduateda full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible.
-55,160.00฿
U2 Universal cutter grinder
• For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiused cutters or negative taper angle of cutters.
• The universal index head is provided at 24 positions so that any particular angel or shape can be obtained, free 3600 or 100 rotation is allowed for grinding End Mills.
• Twist Drill. Lathe Tools, only replace the attachment to the index head without any complex setup.
• Made in Taiwan
-5,324.00฿
VA-6 Angle fixed milling vise 6″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
-11,090.00฿
VA-8 Angle fixed milling vise 8″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
-39,200.00฿
VEC-100 Ejector Pin Cutting Machine,Capacity Ø25 x 300L
• For cutting ejector pin of mould. Or machine key. Round rod.
• Easy to exchange the emery wheel.
• Made in Taiwan
-2,248.00฿
VERTEX CK-10 52-PCS Steel Clamping Kit M10
• Heat treated steel black oxide finish.
• For mechanics, milling equipment, tools, other mechanic equipment
• Made in Taiwan
VERTEX VCF-500W Chamfering & Deburring Unit,Wheel-Type
• Simplified operation, suitable for unskilled personnel.
• Easily to be beveled for any length made of steel, cast iron, nonferrous metals, plastics, acrylic etc.
-18,934.00฿
VERTEX VDG-13A Precision Drill Grinder Ø2.0-Ø13 MM
• For drill re-sharpen, regrind,fix correct angle and sharp “drills”.
• Precision, efficient, easy operation, reasonable price, fast result
• Grinding angle 90-140°
-3,292.00฿
VERTEX VK-5 K-Type Milling vise 5″
• ปากกาจับชิ้นงาน K-Type Milling Vise 5 นิ้ว รุ่นประหยัด
• เป็นอุปกรณ์ที่ใช้งานจริงได้อย่างแม่นยำและมีคุณภาพสูง
• ปากกาเคลื่อนย้ายได้และฐานหมุนทำจากเหล็กหล่อแรงดึงสูงแบบละเอียด
• แผ่นเพสทำจากเหล็กกล้าพร้อมชุบแข็ง
• เหมาะที่สุดสำหรับงานกัดงานเจียรและงานเจาะ