Currently Empty: 0.00฿
KGB-35 Pressure-Relief Type Grease Pneumatic Lubricator Tank 1000 CC 220V
• KGB types are suitable for grease NLGI grades 000, 00 and 0.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
• KGB can be operated by Programmable Logic Controller (PLC). The pressure relief system of KGB is pneumatic and recommendation for air pressure range is 4.5 ~ 8 kg. It has to work with CEB Type Volume Distributor which designs as a singular outlet with fixed discharge volume that each lubricating point has equal amount of lubricant. There are different types of discharge volume options such as 0.03, 0.06, 0.10, 0.16, 0.20, 0.30, 0.40, 0.50cc/ stroke upon request. Grease will feed during the operation time of the lubricator and the amount of grease feeding is fixed.
• Pressure switch can be added as optional for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn’t reach the default setting, it sends a alarm signal. NO (Normally Open) contact is available on the request.
• Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
• For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
• When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
• It has a pressure gauge that the operator can check the pressure easily.
-4,275.00฿
KSC-35 Grease Electric Lubricator 1000 CC 220V
• KSC type is without timer that could be controlled by Programmable Logic Controller.(PLC)
• It is divided by the volume of grease tank KSC-30(600cc), KSC-35(1000cc), KSC-40(800cc), and KSC-50(2000cc). Please refer to the specification for further details.
• Recommend using a grease gun for filling with lubricant from the grease inlet, It can avoid air or impurities dropping into the grease tank.
• It has a pressure gauge where an operator can check the pressure easily.
• Recommend working with CV type progressive feeder that can easily control the volume of lubricant.
CV type progressive feeder can be assembled with NO (Normal Open) or NC (Normal Close) sensor switch on request.
• Its function is similar to KSB type. The difference is that KSC type is without timer but KSB type is with timer.
• Fill the lubricator with grease and let it run several times to exhaust air before mounting the
distributors.
PMO-0-04 Horizontal Motor With Cast Iron Frame CHEN YING 1/2HP 220V
• Horizontal Motor 1/2 HP 220V 1 phase
• Assembled W/Heavy Oil Pump For CYP-204 , CYP-206 , CYP-208 , CYP-210
-2,875.00฿
PMO-1 Oil Pump With Horizontal Motor 1/4 HP Flow rate 3 l/min
* Integrated Motor with Oil Pump only rotates either clockwise or anti-clockwise and the specification is only available for 1/4 HP Horizontal Motor.
* The shafts of motor and pump rotor are integrated so that it can prevent the two shafts from chafing against each other and prolong the life time of it.
* There are CYP-12A and CYP-13A available for different flow rates.
* It can be added an adjustable pressure valve as optional. The range of pressure adjustment is 2~5 kgf/cm².
* It can be applied widely for lubricating or cooling in various machines, such as CNC
machines, knitting machines and planning machines.
* Suitable oil viscosity range is 32~68cSt@40 ℃
* The suitable operation temperature range is 0℃ ~ 90℃.
• Made in taiwan